Ƙungiyar Ayyukan Ruwa ta Amurka (AWWA) ce ta haɓaka ma'auni na AWWA C207 kuma an fi dacewa da daidaitattun ƙayyadaddun abubuwan haɗin flange a cikin samar da ruwa na birni da tsarin magudanar ruwa. Cikakken sunan wannan ma'auni shine "AWWA C207 - Flanges Bututu don Sabis na Ruwa - Girman 4 In. Ta hanyar 144 In. (100mm Ta hanyar 3,600 mm)".
KarkashinAWWA C207 misali, Slip-On Flangenau'in flange ne na kowa da ake amfani dashi don haɗa bututu, bawuloli, famfo da sauran kayan aikin bututu. Anan akwai wasu bayanai game da wuyan lebur ɗin walda a kowane ma'aunin AWWA C207:
Zamewa-On babban flangeflange ne wanda yawanci yana da lebur fuskar flange kuma ana amfani dashi don haɗin walda mai lebur tare da bututu. Hakanan yana da sashin wuyan zaren don haɗawa zuwa flange mai zaren. Tsawon wuyan wuyan wuyansa sau da yawa yakan bambanta kamar yadda ake buƙata don saduwa da takamaiman buƙatun haɗin bututu.
Girman Girma:
TheAWWA C207 StandardƘayyadaddun flanges masu wuyan hannu masu girma dabam daga 4 in. (100 mm) zuwa 144 in. (3,600 mm) don nau'ikan diamita na bututu.
Matsayin Matsi:
Dangane da ma'auni na AWWA C207, ƙwanƙolin walƙiya mai wuƙa yawanci ana rarraba su zuwa nau'ikan matsin lamba daban-daban don ɗaukar buƙatun matsin aiki daban-daban. Matakan matsa lamba daban-daban sun dace da aikace-aikace daban-daban da ayyukan injiniya.
Abu:
Slip-On hubbed Flange yawanci ana yin shi da ƙarfe na carbon, bakin karfe ko wasu kayan ƙarfe masu dacewa don dacewa da yanayin aiki daban-daban da kafofin watsa labarai. Zaɓin kayan aiki zai dogara ne akan takamaiman buƙatun aikin da yanayin aikace-aikacen tsarin bututu.
Bukatun ƙira:
Ma'aunin AWWA C207 ya haɗa da buƙatun ƙira donzamewa a kan manyan flangeskamar girma, juriya, zaren, da ramukan da aka buga. Waɗannan buƙatun suna taimakawa tabbatar da aikin flange da aminci yayin shigarwa da amfani.
Yankunan aikace-aikace:
Slip-On hubbed Flanges ana amfani da su sosai a cikin samar da ruwa na birni da tsarin bututun magudanar ruwa, gami da samar da ruwa na birni, samar da ruwan masana'antu, kula da ruwa da kula da ruwa da sauran aikace-aikace. Ana amfani da su don haɗa bututu, bawul, famfo da sauran kayan aikin bututu don tabbatar da aminci da amincin tsarin bututun.
A taƙaice, wuyan lebur ɗin walƙiya nau'in flange ne na gama gari wanda ya dace da ƙa'idodin AWWA C207 kuma ana amfani da su sosai a ayyukan ruwa da ruwan sha na birni. Wannan flange yana haɗa bututu ta hanyar walƙiya mai lebur kuma yana da wuyansa don haɗin zaren, wanda za'a iya amfani da shi zuwa diamita na bututu daban-daban da matakan matsa lamba. Ya kamata a yi la'akari da zaɓin flanges na wuƙaƙƙen walƙiya bisa takamaiman buƙatun aikin da buƙatun ƙirar tsarin bututun.
Lokacin aikawa: Oktoba-10-2023
